Swing Gate Opener 220v
The power is 62W, which can be applied to swing doors with a single door within 3 meters and 400kg. The purpose of opening and closing the door is achieved through the extension of the arm. The arm of this model of the door opener can be extended up to 45cm.
Swing Gate Opener 220v (model SW400DC) Instruction
The power is 62W, which can be applied to swing doors with a single door within 3 meters and 400kg. The purpose of opening and closing the door is achieved through the extension of the arm. The arm of this model of the door opener can be extended up to 45cm.
Technical Parameters
1. 220V/50Hz;110V/60Hz available(the transformer is different)
2. 22~26s / 90° gate moving speed
3. 3800N max.force
4. Less than 60dB noise
5. DC24V motor and control unit
Specification
1. For this model of swing gate opener, 20pcs remote controls can be added and the remote distance is more than 30 meters.
2. Single button mode, one button on the transmitter can control the gate open, close and stop.
433.92MHz frequency can be working in -20°C - +70°C temperature.
3. Solar panel kit can be connected to charge for the motor to save the electric.
4. When the arm is fully extended, the length of the gate operator arm is 1450mm, when the arm is fully retracted, the length of the gate operator arm is 1000mm.
5. The direct installation angle of the gate and the arm of swing gate opener will also affect whether the gate can be opened/closed normally. Please install it according to the instructions.
In the first installation of gate openers, the installer need to set open and closed limit switch positions for running the travel. The safety stopper and limit stopper are needed to install. (please check your manual)
Send Inquiry
