IR Photoelectric Sensor
IR Photoelectric Sensor (IR13) Instruction Retro-reflection type 1. Supply the power to the photoelectric switch, after setting the photoelectric switch and the reflector(MS-2A) in face to face. 2. Set the photoelectric switch in the position which indicator turns on, as adjusting the mirror or...
IR Photoelectric Sensor (IR13) Instruction
Retro-reflection type
1. Supply the power to the photoelectric switch, after setting the photoelectric switch and the reflector(MS-2A) in face to face.
2. Set the photoelectric switch in the position which indicator turns on, as adjusting the mirror or the switch right and left.
3. Adjust up and down direction as the same.
4. After adjustment, check the stability of operation putting the object at the optical axis.
※If use more than 2 photoelectric switch in parallel, the space between them should be more than 30cm.
※If reflectance of target is higher than non-glossy white paper, it might cause malfunction by reflection from the target when the target is near to photoelectric switch.
Therefore put enough space between the target and photoelectric switch or the surface of target should be installed at an angle of 30 to 45° against optical axis.
(When sensing target with high reflectance near by, photoelectric sensing with the polarizing after should be used.)
Specifications
Type | DC power, relay contact output |
Sensing distance | 0.1-7m |
Sensing target | Opaque materials of Min.φ60mm |
Response time | Max.50mA |
Power supply | 12-24VDC±10%(Ripple P-P:Max.10%) |
Current consumption | Max.50mA |
Light source | Infrared LED(850mm) |
Product standard | GB/T 14048.10-2008 |
Control output | Relay contact output Relay contact capacity: 30VDC 2A of resistive load, 250VAC 1.0A of resistive load Relay contact composition:1pc |
Relay lifetime | Mechanically: Min.10,000,000 operation Electrically: Min.100,000 operation |
Light receiving element | Photo IC |
IR photoelectric sensor environment
Ambient illumination Sunlight:
Max.11,000lx,Incandescent lamp:Max.3,000lx(Receiver illumination)
Ambient temperature:
-20℃ to 70℃
Ambient humidity：
35 to 85%RH, Storage:35 to 85%RH
Send Inquiry
