WiFi Remote Control

WiFi to Remote RF Converter Instruction

The WiFi remote control can support android and IOS users, there is an user manual, a WiFi remote(with antenna) and an USB line in the package, after you download the the app and connect to the remote, the method of learning and deleting remotes is as same as the original remote controls.

Product Features

◆The WI-FI remote control device supports multiple brands of remote control,and generates remote control directly through the APP brand selection list. Unknown brands can identify and add brand remote control through custom methods.(Support brand detailed reference list).

◆ The device supports copy universal fixed code and learning code to generate remote control.

◆ Support SUB-1G multi-frequency(240MHZ~930MHZ), With antenna.

◆ Support one-button identification: whether the customer’s remote control frequency and code type,products support.

◆ Remote control: The mobile terminal can remotely control the remote control device.

◆ Support one-click connection network.

◆ Remote management is simple: One converter device can match various controllers with different brands, and the APP can delete and rename different brands of remote controllers.

◆ Support for power-off memory function.

Note

1. Please do not put the device in a closed corner, and the distance from the device to the router is within 10m to ensure normal communication. This can better ensure the stability of the device connection.

2. The device and the phone need to be connected to the same router when the device is added.

3. By pressing the TEST button to test the remote control,each time it is a long beep,check whether the remote control is kept at the required distance from the device,and whether the remote controller used is properly coded.(If the remote control makes a long beep during multiple tests,the remote control code

format device does not support)

4. Can add up to about 100 type remote controls.( Different brands have different data sizes, and the actual quantity is subject to actual addition).

◆ The remote control that is not needed is deleted as much as possible,leaving room for subsequent addition of the remote control.

◆ The remote control is out of quantity and the remote control cannot be added.Need to delete some remote controls and add them.

◆ The factory settings are restored on the APP,and all remote control data can be cleared at one time.

5. The add device(device access network) timeout can perform the following checks:

◆ Please make sure connecting 2.4 GWIFI equipment. It will be failed if connect 5G network.

◆ Set SSID hide button to open when adding device, and then configure device network.

◆ Press the button for 3 times and the green indicator will flash to start the network distribution.