
Automation Of Sliding Doors
DKC800AC Sliding Gate Automation Kit is suitable for powering the opening and closing motion of gates up to 800kg in weight, up to a length of 12m.
Automation of Sliding Doors Introduction
DKC800AC Sliding Gate Automation Kit is suitable for powering the opening and closing motion of gates up to 800kg in weight, up to a length of 12m.
Gate motion is achieved by the rotating output gear of the gate opener driving the gear rack (sold separately) fitted to the moving gate.
The gate opener requires you to press the remote control once to open, and once again to close. This is a safety feature to ensure safe operation
This product is only powered by AC110V/220V power supply or backup battery power and solar power.
Parameters
Model | DKC800AC |
Power Supply | 110VAC/60Hz; 220VAC/50Hz |
Running Speed | 13m/min |
Limit Switch | Mechanical/Magnetic |
Noise | ≤58dB |
Working Duty | S2, 20min |
Remote Distance | ≥30m |
Remote Frequency | 433.92MHz |
Remote Mode | Single/Three Button |
Remote up Pairing | 40 |
Environment Temperature | -20℃~+70℃ |
Package Weight | 10.18kg |
Feature
1. AC motor, built in en intelligent control board.
2. Can be opened by manual release key when the power is off.
3. External security device and access control system can be connected.
4. Customized products available.
Gate Preparation
Ensure that the sliding gate is correctly installed.
The gate is horizontal and level and the gate can glide back and forth smoothly when moved by hand before installing the gate opener.
Wheels and guide rollers should rotate easily and be free from dirt or grime.
Track should be flat, level and firmly affixed.
Any misalignment in the gate will affect performance of the automatic gate opener.
Shipment
1. By sea: the shipping time is about 2 month.(to US)
2. By air: the shipping time is about 20 days.(to US)
3. By express: the shipping time is about two months.(to US)
Send Inquiry









