Electric Sliding Gate Operator
DKC800ACL electric chain driven sliding gate opener can be installed in a variety of different materials on the sliding patio gates, through the action of the electric sliding gate opener to achieve the opening and closing of the gate.
Electric Sliding Gate Operator Introduction (Model DKC800ACL)
DKC800ACL electric chain driven sliding gate opener can be installed in a variety of different materials on the sliding patio gates, through the action of the electric sliding gate opener to achieve the opening and closing of the gate.
It is suitable for powering the opening and closing motion of gates up to 800kg in weight, up to a length of 12m.
Please ensure that the input voltage used matches with the supply voltage of gate opener.
Gate Preparation
Ensure that the sliding gate is correctly installed.
Wheels and guide rollers should rotate easily and be free from dirt or grime.
Track should be flat, level and firmly affixed.
Any misalignment in the gate will affect performance of the automatic gate opener.
Parameters
Model | DKC800ACL |
Power Supply | 110VAC/60Hz; 220VAC/50Hz |
Limit Switch | Mechanical/Magnetic |
Noise | ≤60dB |
Remote Distance | ≥30m |
Remote Frequency | 433.92MHz |
Remote Mode | Single/Three Button |
Environment Temperature | -20℃～+70℃ |
Feature
1. AC motor, built in an intelligent control board.
2. Can be opened by manual release key when the power is off.
3. External security device and access control system can be connected.
Technology advantages
We are willing to develop all new material only if it’s required in application.
All our technology innovation only for one aim-the best quality, even that means a higher cost and lower production rate.
Our company uses the most advanced equipment to make the best quality products.
All of our products are supplied directly from factory. So the price is very competitive.
All products have a one-years warranty.
Send Inquiry
