Automatic Sliding Gate Motors 1000kg
PY1000ACL automatic sliding gate motors 1000kg is suitable for sliding gates up to 1000kg in weight and 40ft in length.
Automatic Sliding Gate Motors 1000kg Instruction
PY1000ACL automatic sliding gate motors 1000kg is suitable for sliding gates up to 1000kg in weight and 40ft in length.
In standard, the package is with 6 meters chain, if your gate is more than 5.5 meters, please don’t forget to buy extra chains.
Technical Parameters
Model | PY1000ACL |
Power Supply | 110VAC/60Hz |
Motor Power | 400W |
Gate Moving Speed | 11-13m/min |
Maximum Loading Weight | 1000KG |
Remote Control Distance | ≥30m |
Remote Control Mode | Single button mode |
Limit Switch | Magnetic limit switch |
Working Noise | ≤60dB |
Working Duty | S2, 20min |
Recording of up Remote Controls | 25 |
Remote Frequency | 433.92 MHz |
Working Temperature | -20°C - +70°C |
Travel Learning
Attention: The control board must learn the travel limit before it can be used normally.
Before the travel learning operation, you must be ensured that the limit is not triggered. Then press and hold the button WORK. The motor will run closing first and led CLOSING flashes. After the gate triggers the closing limit, the motor will run opening and led OPENING flashes. When the gate triggers the opening limit, the motor will run closing again. Finally, as the gate triggers closing limit, travel learning is completed.
Dip switch
AUTO CLOSING:OFF-- No automatic close function; ON--Automatic close function.
RX 4 BUTTON: OFF—Single button mode remote control; ON—Three button mode remote control.
SBS MODE: OFF—Pedestrian mode; ON—No pedestrian mode.
MOT.DIRECTION: OFF—Left installation; ON---Right installation.
Send Inquiry
