AC Power Automatic Gate Motor
The DKC800ACL sliding gate opener is applicable to gates with weight less than 800KG, and length less than 12m. The gate opener is driven by the sprocket and chain transmission.This gate opener must be installed inside the enclosure of your property for safety.
Sliding Gate Opener (model DKC800ACL) Introduction
The DKC800ACL sliding gate opener is applicable to gates with weight less than 800kg, and length less than 12m. The gate opener is driven by the rotating output sprocket of the gate opener driving the chain fitted to the moving gate. This gate opener must be installed inside the enclosure of your property for safety.
Technical parameters
Model | DKC800ACL |
Power supply | 110V/60Hz |
Motor power | 380W |
Gate moving speed | 13m/min |
Maximum weight of gate | 800KG |
Remote control distance | ≥ 30m |
Remote control mode | Single / Three button mode |
Limit switch | Mechanical / Magnetic limit switch |
Noise | ≤ 58dB |
Working duty | S2, 20min |
Recording of maxium remote controls | 25 |
Frequency | 433.92 MHz |
Working temperature | -20°C ~ +70°C |
Package weight | 16.5KG |
Safety Instruction
Warning: Incorrect or improper use of this product can cause damage to persons, animals or properties.
Please ensure that the input voltage used matches with the supply voltage of gate opener.
All modifications to wiring or electrics, and any adjustment or maintenance to input voltage must be done by a qualified electrician.
All potential hazards and exposed pinch points of the gate must be eliminated or guarded prior to installation of this gate opener.
If required, install infrared photocell to detect obstructions and prevent injury to person or damage to property.
Automatic Close Time Setting
Automatic close time setting: the gate is operated to open by remote control operation and will close automatically after a few seconds delay.
3 OFF 4 ON: automatic close delay time is 12s.
3 ON 4 OFF: automatic close delay time is 24s.
3 ON 4 ON: automatic close delay time is 36s.
3 OFF 4 OFF: no automatic close function.
Default setting: 3 OFF 4 OFF
Disable the automatic close function.
How to make an order
● The product is in stock: Please make an order directly on this page.
● The product is out of stock: Please contact the customer service for the product stock information.
● Need a customized product:Please contact the customer service and we will give you a quotation.
Customer service
● One-year warranty.
● Quick reply to help you solve the problems.
● Professional technical team.
Send Inquiry
