
Sectional Door Machine Heavy Duty
The sectional door machine heavy duty is mainly used in the industrial sectional door equipped with balance spring, but also can applied in lifting industrial door. The installation of door machine has two forms, shaft drive and chain drive.
Sectional Door Machine Heavy Duty Introduction
The sectional door machine heavy duty is mainly used in the industrial sectional door equipped with balance spring, but also can applied in lifting industrial door. The installation of door machine has two forms, shaft drive and chain drive.
The factory standard configuration is shaft drive. If user want to adopt chain drive installation, they can choose the appropriate combination of sprocket chain according to the installation needs.
Door should be flexible and run without stagnation; lead rail end of door must be installed with mechanical stop block and buffering booster to prevent the door from rolling out.

Technical Parameters
Model | GK100 |
Power Supply | AC220V single phase or AC380V three phase |
100N.m | |
Noise | ≤55dB |
Output Shaft Diameter | Φ25.4mm |
Environment Temperature | -20℃ ~+45℃ |
Limit Switch | Mechanical |
Feature
1. Aluminum alloy surface with spray treatment.
2. Shaft drive/chain drive installation.
3. Interface between machine and control unit through quick connector.
4. Hand chain for manual release under emergency condition.
5. Customized products available.
The reason of choosing us:
1. We have more than 10 years production and sales experience, we have professional production equipment and personnel.
2. Our professional technical support can help you solve the problems and meet your custom requirements.
3. We are factory, so the price will be competitive.
4. Small quantity is acceptable.
5. Welcome you to visit our factory.
All of our products are supplied directly from factory. So the price is very competitive.
Send Inquiry









