Sectional Door Opener for Heavy Duty
The electronic limit switch industrial door machine is mainly used in the industrial sectional door equipped with balance spring, but also can applied in lifting industrial door. The installation of door machine has two forms, shaft drive and chain drive.
Sectional Door Opener for Heavy Duty Introduction
The industrial door operator is mainly used in the industrial sectional door equipped with balance spring, but also can applied in lifting industrial door. The installation of door machine has two forms, shaft drive and chain drive. The factory standard configuration is shaft drive. If user want to adopt chain drive installation, they can choose the appropriate combination of sprocket chain according to the installation needs.
Technical Parameters
Model | GK100 |
Power Supply | AC220V single phase or AC380V three phase |
100N.m | |
Noise | ≤55dB |
Output Shaft Diameter | Φ25.4mm |
Environment Temperature | -20℃ ～+45℃ |
Limit Switch | Mechanical |
Function
1. Soft start ans slow stop
2. Automatic reverse after encountering obstacles with photocell installed.
3. Self-locking structure.
4. Thermal protection structure.
5. Output shaft rotates 20 rounds reaches to it’s maximum limit travel.
Check the door
After the door is installed, adjust the torsion spring, manually opening or closing the door should be flexible and run without stagnation, observe the direction of rotation of the rope sheave which should be consistent with the direction of opening and closing of industrial door operator.
How to make an order?
The product is in stock: Please make an order directly on this page.
The product is out of stock: Please contact the customer service for the product stock information.
Need a customized product: Please contact the customer service and we will give you a quotation.
All of our products are supplied directly from factory. So the price is very competitive.
Send Inquiry
