Sectional Door Opener for Light Duty
The industrial door operator is mainly used in the industrial sectional door equipped with balance spring, but also can applied in lifting industrial door. The installation of door machine has two forms, shaft drive and chain drive.
Sectional Door Opener for Light Duty Introduction
The industrial door operator is mainly used in the industrial sectional door equipped with balance spring, but also can applied in lifting industrial door. The installation of door machine has two forms, shaft drive and chain drive. The factory standard configuration is shaft drive.
This industrial door operator is only allowed to be installed on well-balanced door which has balance spring, otherwise machine may be damaged due to overload.
Technical Parameters
Model (Single Phase AC220V±10%) | GK40 |
Rated Power | 300W |
40N.m | |
No-load Continuous Running Time | 15min |
Thermal Protection Temperature | 120℃ |
No-load Rotation Speed | 24r/min |
Lubricating System | Oil-immersed |
Noise | ≤55dB |
Quick Release | Optional |
Maximum Limit Travel | Output shaft rotates 20 rounds |
Output Shaft Diameter | Φ25.4mm |
Environment Temperature | -20℃～+45℃ |
Working Duty | S2-15min |
Quality assurance
1. Checking raw material before producing
2. Checking one by one before the assembling
3. Checking one by one during the production
4. Have the random inspection before the delivery
Our Service
We are a store integrating design, production and sales of automatic gate openers. We are committed to providing more choices for our customers, try to meet most of our customers, and we are glad to accept suggestions for our products,we will try our best to analyze and optimize our products.Thank you so much for your support.
All of our products are supplied directly from factory. So the price is very competitive.
All products have a one-years warranty.
Send Inquiry
