Industrial Door Opener

Introduction

The industrial door opener is mainly used in the industrial sectional door equipped with balance spring, but also can applied in lifting industrial door. The installation of door machine has two forms, shaft drive and chain drive.

The factory standard configuration is shaft drive. If user want to adopt chain drive installation, they can choose the appropriate combination of sprocket chain according to the installation needs.

Technical Parameters:

INDUS100DC    For sectional doors up to 45m²

• Working under mains of AC220V single phase.

• Electric limit switch.

• 750W motor in 100N.m.

• Output speed range from 10~50RPM adjustable.

• Oil lubricating system.

• Max. 3000RPM.

• Absolute value of single cycle encoder.

• Hand-pulled chain for quick release in case power failure.

• Output shaft rotates 19 rounds reaches to it’s maximum limit travel.

• Pull cord switch for manual/auto.

• Operating temperature from -20℃ to +50℃

Kit Features:

Aluminum alloy surface.

Shaft drive/Chain drive installation.

Soft start and slow stop.

Automatic reverse after encountering obstacles with photocell installed.

Menu-typed LCD control for electric limit type.

Interface between machine and control unit trough quick connector.

Hand chain for manual release under emergency condition.

Installation

Control box should be installed in the wall or column of 1.4 meters where the operation of door can be observed to prevent children from inadvertently touching. While keeping the remote control, prohibit children to touch or play just in case of danger. Do not use the remote control when you cannot see the operation of door.

Our Advantages

Extensive production experience: We have extensive product experience and industry experience. We were founded in 2009, is a well-known manufacturer in international gate automation industry.

Before the mass production, we always make sample first, and conduct quality inspection before shipment.