Industrial Door Motor
The industrial door operator is mainly used in the industrial sectional door equipped with balance spring, but also can applied in lifting industrial door. The installation of door machine has two forms, shaft drive and chain drive.
Introduction
The industrial door operator is mainly used in the industrial sectional door equipped with balance spring, but also can applied in lifting industrial door. The installation of door machine has two forms, shaft drive and chain drive.
The factory standard configuration is shaft drive. If user want to adopt chain drive installation, they can choose the appropriate combination of sprocket chain according to the installation needs.
If you need safety and convenience, this automatic industrial sectional door machine is your ideal choice, which is suitable for sectional doors for industrial, commercial or residential.
Technical Parameters
INDUS70DC For sectional doors up to 30m2
Working under mains of AC220V single phase.
Electric limit switch.
450W motor in 70N.m.
Output speed range from 10~50RPM adjustable.
Oil lubricating system.
Max. 3000RPM.
Absolute value of single cycle encoder.
Hand-pulled chain for quick release in case power failure.
Output shaft rotates 19 rounds reaches to it’s maximum limit travel.
Pull cord switch for manual/auto.
Operating temperature from -20℃ to +50℃
Kit Contents
1 220VAC Motor.
1 Control Unit with Built-in Control Board.
1 10m Hand Chain
2 Remote Transmitters
1 Encoder (network) cable (5m)
1 Motor (four-core) wire (5m)
1 Motor encoder (five-core) wire (5m)
1 Safety switch (two core) wire (5m)
1 User Manual
Mounting Accessories
Kraft Package
Installation
Installation and wiring must be in accordance with the construction standards and electrical standards, diameter ≧ 1.5mm2; power must have a reliable grounding, ground wire must be reliably connected to the place labeled ground tab, ground lead on the power line is prohibited to be removed; front end of incoming power line should be installed with electrical leakage protector which is in line with national standards.
Our Services
We are always dedicated to providing customers with good quality products.
We provide the excellent customer service and try our best to solve your problems.
Send Inquiry
