Electronic Limit Switch Industrial Door Machine

The electronic limit switch industrial door machine is mainly used in the industrial sectional door equipped with balance spring, but also can applied in lifting industrial door. The installation of door machine has two forms, shaft drive and chain drive.

Send Inquiry

Add To Inquiry

Introduction

The factory standard configuration is shaft drive. If user want to adopt chain drive installation, they can choose the appropriate combination of sprocket chain according to the installation needs.

This machine is suitable for a sectional door with a maximum area of 45㎡.

commercial sectional door machine

Technical Parameters:

INDUS100DC For sectional doors up to 45m²

Model	INDUS100DC
Power Supply	AC220V±10%
Motor Power	750W
Max.Output Torque	100N.m
Output Speed Range	10~40RPM
Max.Loading（Door Area）	45m²
Main engine Dimension（mm）	337x135x214
Main engine Weight（kg）	12.5
Reducer Lubricating System	Liquid Oil Lubrication
Encoder Type	Single Circle Absolute Encoder
Manual/Auto switch	Pull Cord Switch
Manual Release	Hand-Pulled Chain
Maximum Limit Travel	Output shaft rotates 19 rounds
Wording Temperature	-20℃ ～+50℃

Kit Features:

Aluminum alloy surface.
Shaft drive/Chain drive installation.
Soft start and slow stop.
Automatic reverse after encountering obstacles with photocell installed.
Menu-typed LCD control for electric limit type.
Interface between machine and control unit trough quick connector.
Hand chain for manual release under emergency condition.

Quality assurance

1. Checking raw material before producing

2. Checking one by one before the assembling

3. Checking one by one during the production

4. Have the random inspection before the delivery

Technology advantages

We are willing to develop all new material only if it’s required in application.
All our technology innovation only for one aim--- the best quality, even that means a higher cost and lower production rate.
Our company uses the most advanced equipment to make the best quality products.