Automation For Industrial Door
This automation for industrial door is mainly used in the industrial sectional door equipped with balance spring, but also can applied in lifting industrial door. The installation of door machine has two forms, shaft drive and chain drive.
Automation for Industrial Door
Automation for Industrial Door Introduction
This automation for industrial door is mainly used in the industrial sectional door equipped with balance spring, but also can applied in lifting industrial door. The installation of door machine has two forms, shaft drive and chain drive.
All parts has been wired before delivery, only need to plug the terminal of the cable into the control unit according to the manual instruction.
This industrial door operator is only allowed to be installed on well-balanced door which has balance spring, otherwise machine may be damaged due to overload.
Technical Parameters:
INDUS150DC For sectional doors up to 65m2
Model | INDUS150DC |
Power Supply | AC220V±10% |
Motor Power | 750W |
Max.Output Torque | 150N.m |
Output Speed Range | 8~30RPM |
Max.Loading（Door Area） | 65m2 |
Reducer Lubricating System | Liquid Oil Lubrication |
Encoder Type | Single Circle Absolute Encoder |
Manual/Auto switch | Pull Cord Switch |
Manual Release | Hand-Pulled Chain |
Maximum Limit Travel | Output shaft rotates 19 rounds |
Wording Temperature | -20℃ ～+50℃ |
Check the door
After the door is installed, adjust the torsion spring, manually opening or closing the door which should be flexible and run without stagnation, observe the direction of rotation of the rope sheave which should be consistent with the direction of opening and closing of industrial door operator.
Our Service
Backed by a 12-month warranty, and free product return & exchange service within 30 days.
We are always dedicated to providing customers with good quality products.
We provide the excellent customer service and try our best to solve your problems.
Send Inquiry
