Car Barrier Gate
DZ SERVO controller of car barrier gate is specially designed for the use of medium speed, high speed barrier gates. The configuration for most of the barrier gate systems can be accomplished by using a standard version controller.
Car Barrier Gate Instruction
1. DZ SERVO controller of car barrier gate is specially designed for the use of medium speed, high speed barrier gates. The configuration for most of the barrier gate systems can be accomplished by using a standard version controller. The position of the boom is continuously detected by the servo motor encoder, which replaces the limit switches used in conventional barrier control systems.
2. The combination of the encoder and the controller unit ensures the maximum control
to the boom optimum running position.
3. The controller can extend the function by using an I / O box (485 to TCP / IP) that can
provide many additional functions. Software modifications are usually made in the manufacturer. The barrier gates have been properly wired by the manufacturer and can be powered on directly. The circuit connections that need to be made during the installation are described in the above picture.
Note!
If some special functions are required, the controller's connection of car barrier gate may differ from which shown in this illustration.
All command generators (push buttons, limit switches, etc.) must be connected by the volt-free contact way.
Package
|
Number |
Title |
Qty |
Unit |
Note |
|
1 |
Barrier gate machine |
1 |
Unit |
Included in machine package |
|
2 |
Machine case press board |
2 |
Piece |
|
|
3 |
Expansion bolt M12 |
4 |
Set |
|
|
4 |
Remote control |
2 |
Unit |
|
|
5 |
Case Key |
2 |
Unit |
|
|
6 |
Instruction |
1 |
Piece |
|
|
7 |
Barrier gate boom |
1 |
unit |
Optional, separate package |
|
8 |
Boom holder |
1 |
unit |
Optional |
|
9 |
Expansion bolt M8 |
4 |
Set |
Optional, for fixing boom holder |
|
10 |
Plug-in Machine control |
1 |
unit |
Optional |
Send Inquiry
