Gate Opener Controller-dkc500dc

Installation

DKC500DC/DKC800DC sliding gate opener is applicable to gate weight less than 500kg/800kg, and length of the sliding gate less than 8m. The drive mode adopts the rack and gear transmission. This gate opener must be installed inside the enclosure or yard for protection.

① Gate opener; ② Wireless keypad (optional); ③ Gate; ④ Infrared sensor (optional); ⑤ Alarm lamp (optional); ⑥ Safety stop block; ⑦ Gear rack; ⑧ Remote control;

Transformer Power Input Connection 

Wiring instruction:

J1 Terminal

5 COM (GND)

6 Photocell input (N.C.);

7 Extra power input +24VDC

J2 Terminal

Connect to 24VAC（Fig.11 shows 120W 230VAC/24VAC annular transformer connection）

BAT+ Terminal

Battery interface

J4 Terminal

DC motor wire connection (Red wire to top, black wire to bottom)

J7 Terminal

1 Gate open control button (N.O.);

2 Gate close control button (N.O.);

3 Stop control button (N.O.);

4 Control button common terminal;

J8 Terminal

24V DC caution light

J10 Terminal

OP Open limit switch;

COM Limit switch common terminal;

CL Close limit switch;

Preparation work before installation Please make sure that the sliding gate is correctly installed, the gate rail is horizontal, and the gate can be manually moved smoothly before installing the gate opener. Cable installation In order to guarantee the normal operation of the gate opener and protect the cables from damages, please bury the motor & power cable and controlling cable separately with two PVC tubes. Concrete pedestal Please cast a concrete pedestal with the size can be 400mm x 250mm, depth be 200mm in advance, so as to firmly install DKC500DC/DKC800DC gate opener. Please make sure the distance between the gate and gate opener is appropriate before casting the pedestal

About us

We appreciate that you can browse and carefully read the details of our products. If you want to know more about our products or want to know about our factory, please feel free to contact us, and we are happy to answer all your questions.

We are committed to showing our products to more customers, highlighting our product and factory advantages, minimizing profits, and giving back to our customers. We hope that our products can satisfy you, and we can also meet any customization needs.