DC Swing Gate Control Board

This DC swing gate control board is 24VDC, which can match all the swing gate machines in our store, such as SW200DC, SW300DC and SW400DC. And it is compatible with our remote controls.

Send Inquiry

Add To Inquiry

DC Swing Gate Control Board Instruction

This DC swing gate control board is 24VDC, which can match all the swing gate machines in our store, such as SW200DC, SW300DC and SW400DC. And it is compatible with our remote controls.

smart circuit board

Terminal	Description
1. AC24VIN	24VAC Power Supply Input
2. +SOLAR-	Solar Power Input
3. +BATT-	24V Battery Input
4. FORCE	Resistance Force
5. SLOW DOWN	Slow Stop Distance
6. SPEED	Moving Speed
7. MOTOR1	Motor1 Output
8. MOTOR2	Motor2 Output
9. -ELOCK+	Electric Lock Output
10. -BLK+	Alarm Lamp Output (Note: pay attention to the negative and positive.)
11. +24V	24V Output: Positive
12. +12V	12V Output: Positive (No output under dormant state)
13. EM1	Motor1 Limit Switch Power Output
14. LM1	Motor1 Limit Switch Signal Input
15. EM2	Motor2 Limit Switch Power Output
16. LM2	Motor2 Limit Switch Signal Input
17. PH	Photo Sensor Input Active
18. PED	Single Gate/Pedestrian Mode Input Active
19. OSC	Single Channel Input Active
20. ANT	Antenna
21. COM	Common

Learning Remote Control

Press and hold "+" button, the alarm light will keep flashing, and digital screen displays remote control mode -- “PO” -- two swing gates single channel mode; “Pd" -- single gate four channel mode; Press the button of the remote control to be learned, the digital screen will show the number of current learned remote control, then the remote control learning is completed. (The default of new paired remote control is two swing gates single channel mode).

Delete Remote Control

Enter into “AE” in the digital screen and then to choose “rE” to delete the remote controls or press and hold the button “+” to delete.