Automation For Swing Gate
The power 60W automation for swing gate kit is applicable to single leaf gate weight less than 400kg (880lbs) , and the length shorter than 3m (10ft) .
Automation for Swing Gate Introduction
The power 60W automation for swing gate kit is applicable to single leaf gate weight less than 400kg (880lbs) , and the length shorter than 3m (10ft) .
The drive mode adopts planetary transmission to combine with the screw rod transmission.
The gate opener must be installed inside the enclosure or yard for protection.
Technical Parameters
Model | SW400DC |
Power Supply | 110VAC/60Hz; 220VAC/50Hz |
Motor Power | DC24V/62W |
Running Speed | 22~26s / 90° |
Maximum Loading Weight | 400KG/Leaf |
Maximum Swing Length | 3m |
Maximum Piston Stroke | 32cm |
Maximum Force | 2500N |
Noise | ≤60dB |
Working Duty | S2, 30min |
Working Temperature | -20°C ~ +70°C |
Remote Distance | ≥30m |
Remote Mode | Single Button/Four Button |
Remote Up Pairing | 32 |
Remote Frequency | 433.92 MHz |
Package Weight | 20KG |
Preparation before Main Machine Installation
1. Before installing the door opener, please confirm that the door were installed correctly, please ensure that the door can be manually operated smoothly, and the door limit stopper can effectively prevent the door to continue moving.
2. Please keep a distance of 40-50mm between the door bottom and the ground for installing the electric lock. If electric lock is not required, the distance between the door bottom and the ground should be ≥20mm.
3. The recommended mounting height of the 2 main machines is around 300 ~ 800mm above the ground, and make sure there are reliable fixed points for mounting brackets.
Technology advantages
We are willing to develop all new material only if it’s required in application.
All our technology innovation only for one aim-the best quality, even that means a higher cost and lower production rate.
Our company uses the most advanced equipment to make the best quality products.
Send Inquiry
