24v Chain Drive Sliding Gate Motor

24v Chain Drive Sliding Gate Motor(GT000DCL) Instruction

Products Specification

● If your local voltage is 110V, please choose the 110V/60Hz power supply; If your local voltage is 220V, please choose the 220V/50Hz power supply.

● 170W motor power, please confirm if 24v chain drive sliding gate motor is suitable for your gate, the motor can be  used for 800kg&12m sliding gates.

● You can choose limit switch method according to your demands(spring limit switch/magnetic limit switch).

● 433.92MHz frequency, all of our devices are in a frequency of 433.92MHz.

● Can be working in the temperature of -20°C ~ +70°C, and with antifreeze oil, needn’t worry when it is working in winter or summer.

● Most 25pcs remote controls can be learned, enough for all your family members to have one transmitter to meet the needs of different households, the control distance is more than 30 meters.

● Low noise(less than 60dB), gates work without harshness and without disturbing your neighbors.

Products Function

● You can set the automatic close time by yourself (3seconds, 10seconds, 30seconds or no auto close function) by adjust the position of dip switch, the default setting is disable this function.

● Switch the remote control mode (single/three button), single button mode meas only one button can control the gate open/stop/close, three button model means first button-open, second button-close, third button-stop.

● Switch the external button mode ((single/three button).

● Opening direction setting, our default setting is right-hand opening, if you want it left-hand opening, just switch this dial to ON.

● Limit switch setting, this default position is ON, this should align with limit switch and is not recommended to be modified by the users.

● Auto-reverse function, Default position is ON, this should align with the opener status and is not recommended to be modified by the users.

● Photocell delay detection, Please enable this function if your motor is connected with a photocell.