video
Gate Motor Kit
gate motor fuse
sliding door industrial
1/2
<< /span>
>

Gate Motor Kit

DKC800AC gate motor kit is compatible with the gates up to 800kg and 12meters, with a 380W AC motor, can be connected to the 110V/220V power supply. For the color of the cover, we have black or blue.(can be customized)

Add To Inquiry

Gate Motor Kit (DKC800AC) Instruction

DKC800AC gate motor kit is compatible with the gates up to 800kg and 12meters, with a 380W AC motor, can be connected to the 110V/220V power supply.

For the color of the cover, we have black or blue.(can be customized)

sliding gate drive 

TECHNICAL PARAMETERS

Model

DKC800AC

Power Supply

110VAC/60Hz; 220VAC/50Hz

Motor Power

380W

Gate Moving Speed

13m/min

Maximum Loading Weight

800KG

Remote Control Distance

≥30m

Remote Control Mode

Single button mode /Three button mode

Limit Switch

Spring limit switch / Magnetic limit switch

Working Noise

≤60dB

Working Duty

S2, 20min

Recording of up Remote Controls

Standard control board: 25; Intelligent control board: 40

Remote Frequency

433.92 MHz

Working Temperature

-20°C - +70°C

Package Weight

10.18KG

 

 

WHATS IN THE BOX

DKC800AC unit x1 (with motor and control board)

Remote transmitter x2

Manual release key x1

Installation parts

Warning Label x1

User Manual x1

(The racks are not included, you can choose nylon/steel racks in our store.)

 

FUNCTION

Standard control board:

Automatic close time setting.

External push button switch-Three button switch/single button switch.

 

Intelligent control board:  

Automatic close time setting.

Meeting obstacles reverse.

Soft start and soft close.

Remote control switch-single channel/four channel.

 

ATTENTION

The gate opener will open the gate to the right-hand side as its default setting. By default, the opener mounts on the right-hand side. If you need to install the gate motor on the left-hand side, the relative wires need to be swapped over.

 

Any works done to the gate opener must be completed whilst the power is off, and the opener is unplugged for security

 

Please don’t forget to take the short wire ( (jump wire) off if you need to connect your infrared photocell sensor.

 

For the wireless device, such as remote control and wireless keypad, we can only make sure that our store wireless device can match our gate opener, although the frequency of your wireless device is as same as ours, maybe it can’t work.


Send Inquiry

(0/10)

clearall