Automatic Industrial Door Operator
This model of automatic industrial door operator is applicable to AC380V power supply, can used for 30 square meters door, with 400W motor power and 60N.m output torque, which is widely used in industrial applications, such as factory warehouse doors, you just need to let us know the area and weight of your door, we can choose the model for your door.
Automatic Industrial Door Operator Instruction
(MODEL INDUS60SE)
This model of automatic industrial door operator is applicable to AC380V power supply, can used for 30 square meters door, with 400W motor power and 60N.m output torque, which is widely used in industrial applications, such as factory warehouse doors, you just need to let us know the area and weight of your door, we can choose the model for your door.
For this automatic industrial door operator, the control box is electric limit switch ,easy to set and use. After you follow this machine, you no longer need to open the door manually. You can use our remote control to open and close the door. If you forget the remote control, you can only press the button on the control box to open or close the door.
Attention
1. Door should be flexible and run without stagnation; The end of door lead rail must be installed with mechanical stop block and buffering booster to prevent the door from rolling out.
2. Control unit should be installed on the wall or a post of 1.4 meters away from the ground where the operation of door can be observed to prevent children from inadvertently touching. Keep the remote control well, do not allow children to touch or play in case of any danger. Do not use the remote control when you didn’t see the operation of door.
3. Before repairing and moving the industrial door operator and its control unit, please cut off the power supply, and make sure that the door has been locked and there is no any risk of falling due to self-weight is null.
Send Inquiry
