What Is The Motor in Industrial Doors?

Industrial doors are widely used in factories, logistics and warehousing, workshop doors, food, chemistry, and other fields, which shows that they are very popular among users. The normal operation of industrial doors cannot be separated from the motor of the industrial door. A good motor brings a good user experience. When it comes to this industrial door motor, it may be unfamiliar to everyone. Today, the editor will talk about what kind of industrial door motor it is,

Installation method of industrial door motor

The motor used for industrial lifting doors must be a specialized motor for industrial doors, and this type of motor is specifically designed for industrial doors. Usually, when installing the industrial door motor, the chain box is connected and fixed to the motor. The U-shaped frame at the front end of the chain box is fixed to the middle position of the wooden board above the torsion spring bracket to connect the chain box. Secondly, use angled steel to make a "π" bracket, connect and fix the lower end to the motor with M8, and fix the upper end to the ceiling with two shrink bolts. Then, fix the hook seat to the middle position of the top door panel using self tapping screws and connect the hook. Connect the power supply later, check the operation status of the motor, adjust the up and down strokes until the upper and lower limits reach the ideal position before stopping.

Main functional characteristics of industrial door motors

1. Electric control box: The electric control box is controlled by three buttons: on, off, and stop; It has multiple interfaces such as infrared and protective airbags.

2. Remote control (optional): Using a rolling code remote control, without duplicate codes, it has good confidentiality performance.

3. Emergency stop button: The control box is equipped with an emergency stop button, which can quickly cut off the power supply of the control circuit in case of emergency, protecting people and machines.

4. Automatic braking system: The motor is equipped with an automatic braking system, which can achieve fast braking and accurate positioning.

5. Quick release handle: The quick release handle can quickly separate the door body from the machine, making installation and maintenance convenient.

6. Mechanical limit cam: It adopts double cam limit and can output passive signals when the door is opened in place, for use in special places.

7. Universal manual chain: can achieve 360 ° rotation, convenient for installation and use.

In summary, the industrial door motor is very important. In the long-term operation of industrial doors, we also need to pay attention to long-term maintenance and upkeep in order to better extend the service life of industrial doors.