Characteristics And Installation Methods Of Industrial Door Motors

The installation method of industrial door motor: The motor used for industrial lifting doors must be a dedicated motor for industrial doors, and this type of motor is specifically designed for industrial doors. Usually, when installing the industrial door motor, the chain box is connected to the motor and fixed. The U-shaped frame at the front end of the chain box is fixed to the middle position of the wooden board above the torsion spring bracket to connect the chain box. Secondly, use angled steel to make a "π" bracket, with the lower end connected to the motor and fixed with M8, and the upper end fixed to the ceiling with two shrink bolts. Then, fix the hook base to the middle position at the top of the top door panel using self tapping screws, and connect the hook. Connect the power supply to the rear, check the operation status of the motor, adjust the up and down travel, and stop only after the upper and lower limits reach the ideal position. The main functional features of the industrial door motor are as follows: 1. Electric control box: The electric control box is controlled by three buttons: open, close, and stop; It has multiple interfaces such as infrared and protective airbags. 2. Remote control (optional): Using a rolling code remote control, without duplicate codes, with good confidentiality performance. 3. Emergency stop button: The control box is equipped with an emergency stop button, which can quickly cut off the power supply of the control circuit in case of emergency, protecting people and machines. 4. Automatic braking system: The motor is equipped with an automatic braking system, which can achieve fast braking and accurate positioning. 5. Quick release handle: The quick release handle can quickly separate the door body from the machine, making it easy to install and maintain. 6. Mechanical limit cam: It adopts double cam limit and can output passive signals when the door is opened in place, for use in special places. 7. Universal manual chain: It can achieve 360 ° rotation, making it easy to install and use. In summary, the industrial door motor is very important. In the long-term operation of the industrial door, we also need to pay attention to long-term maintenance and upkeep in order to better extend the service life of the industrial door.