Precautions When Installing A Sliding Door Opener

Sliding door openers are specially designed to open and close sliding doors (sliding doors). Before using the device, pay attention to the following points:

1. It is only allowed to be used in a state of sound technology, and must be used with safety awareness and risk awareness according to the rules in the product specification;

2. The door cannot be installed on the slope, and there must be a certain safety interval between the door body and other objects;

3. In order to avoid the effect of freezing in winter, the running track must be installed in a well-drained center;

4. Ensure that the door body can slide smoothly on the track, otherwise it will lead to failure to open or close the door;

5. The limit installation must be installed at the maximum opening position and closing position of the door, otherwise the door body may fall off the track in the emergency unlocking state;

6. The door body must be stable and resistant to twisting, that is, it is not allowed to swing, bend or deform when it is opened or closed;

7. The sliding door operator cannot compensate for the defects of the door itself or the wrong device of the door;

8. Ensure that the sliding door machine is installed on a reliable foundation;

9. There should be a 2--3mm gap between the output gear of the translation door opener and the walking rack on the door body;

10. Before using the sliding door operator, be sure to release any locking installations on the door body (such as electronic locks, door latches, etc.);

11. Cable casings must be installed. If the door is opened/closed by a button, the minimum height of the button device from the ground should be 1.6 meters to prevent children from misoperation.