Must See Before Purchasing The Swing Door Motor

1、 When selecting the swing door motor, you should select the courtyard swing door machine; If it is translational, the courtyard translational gantry crane should be selected. Then it also depends on the installation conditions and requirements of the door opener, and whether the installation is simple. In general, there are many people who choose the curved arm door opener, because it has the advantages of not affecting the appearance of the door body and not damaging the structure of the door post. The most core part of the door opener is the motor. The quality of the motor plays a decisive role in the quality of the door opener. Therefore, the quality of the door opener also needs to be analyzed from its motor. However, the material and manufacturing process of the reducer volute, shaft sleeve, worm gear and worm, rotor support structure and mounting base of the motor determine the length of the motor's service life and the ability to resist bumps and impacts. The waterproof performance of the door opener motor is also very important. Its waterproof performance is generally affected by the outlet and the bottom cover sealing ring. The motor outlet of the door opener with good waterproof performance is fully sealed and subject to special waterproof treatment, and the bottom cover sealing ring is made of oil-resistant rubber sealing ring, so you must pay attention to the comparison when purchasing the door opener. 2、 Second look at functions: ten intelligent functions are integrated. Due to the use of computer chips, the control system of this product has the following intelligent functions: 1. Single or double door selection: single or double doors can be opened and closed simultaneously through remote control. 2. Key locking: All key functions of the control panel can be locked through the operation of the remote control to prevent unauthorized opening. 3. Repetitive operation limit: prevent door damage caused by misoperation when the door is opened in place. 4. Automatic stop in case of obstruction: it can stop automatically in case of pedestrians, vehicles or obstacles during operation to ensure safety. The resistance is set in the controller. 5. In place prompt: close the door in place and lock it reliably, and the controller emits a "tick" prompt tone. 6. Time protection: the single operation time of the door motor is set at 60 seconds to ensure the safety of the motor. 7. Infrared protection: through the external infrared detector, when pedestrians or vehicles pass through during operation, it will automatically stop. (Optional) 8. Automatic door closing: after the door is opened, the door will close automatically within the set time. (Optional function) 9. Automatic identification interface: as a part of the security system, this interface can be connected with cameras and card readers for automatic identification and release of vehicles (optional accessories).