Circuit Board for Magnetic Limit Switch Sliding Gate Opener
1.110V/220 AC 2.PCB BOARD MATERIAL -- FR-4. COMPATIBILITY--The control board is only compatible with our remote control. You can ask us before you make an order. 3.AUTOMATIC CLOSE TIME SETTING--12s, 24s, 36s. 4.REMOTE CONTROL--For this control board，you can add 40 remote controls.(if you need the remote control,you can choose it from our store.) 5.EASY TO INSTALL AND SETUP--You can install and setup by yourself according to the instructions easily.
Remote Control Operation
Three button mode remote control: OPEN/CLOSE/STOP of motor are controlled by three buttons separately on the remote control. Single button mode remote control: OPEN/CLOSE/STOP of motor are controlled by one button circularly on the remote control. The forth button on remote control is Pedestrian Mode--press the forth button while the gate is closed, the gate will open 1m wide to allow pedestrian access
Clearing Remote Controls
To delete all paired remote controls, press and hold the button ‘S1’ till LEARN LED turns on. When the LEARN LED turns off, all previously paired remote controls will be deleted.
DIP Switch Adjustment All changes to these settings must be completed by a licensed electrician
Problems：The gate cannot be open or closed normally, and the LED does not work.
Possible Reasons：1.The power is off. 2.The fuse is burns out. 3.There are some problems with the wiring of the control board.
Solutions：1.Switch on the power supply. 2.Check the fuse (code FU), and change the fuse if burns out. 3.Rewiring according to the instructions.
Warranty Ordinance
1. To repair with this warranty card and invoice during the warranty period.
2. Warranty period: 1 year after the date of invoice.
3. Without unauthorized dismantling, we’ll repair or replace any product broken or damage due to quality problem for free.
Send Inquiry
